Discover in our range of all our Wood Machines . Come visit our factory and meet our designer

TAU/100C

Automatic round rod milling machine with loader for the production of straight round sticks with constant diameter. The machine is particularly suitable for the production of big poles like, tent-rods,…

FMR/CP5

This machine has been manufactured to perform the automatic drilling, chamfering and the slot on the knife handles. The machine is equipped with an automatic loader and a high precision rotary table with…

TAU/100

Automatic round rod milling machine with loader for the production of straight round sticks with constant diameter. The machine is particularly suitable for the production of big poles like, tent-rods,…

2F/C

Automatic drilling machine to drill at the same time countersink holes on both sides of knife handles. The machine is equipped with automatic loader.

FMR/C

This machine has been designed and manufactured to perform the automatic drilling, chamfering and cutting on the knife handles. The machine is equipped with an automatic loader and a high precision rotary…

TAU/2LU

This machine allows to mill and sand round wooden handles like broom and rake handles, tent-rods, chair and table legs, bed-parts, sun-umbrella.

TAU/60

Automatic round rod milling machine for the production of straight and very slightly curved round sticks with constant diameter. The machine is particularly suitable for the production of broom and…

FIL/R

Machine to thread both straight and conical on broom handles. Thanks to a special device it is possible to adjust the tool in order to thread different diameters. The machine is particularly fit to work…

TAU/30

Automatic round rod milling machine for the production of straight round sticks with constant diameter. The machine is particularly suitable for the production of broom and rake handles, tent-rods,…

TAUS 2½cnc

It is the ideal machine to produce sticks with cylindrical section and variable diameters such as billiard cues, broom, shovel, hoe, rake handles, chair legs etc. Machine with numerical control with 3…

2FS/P

Automatic drilling machine to drill at the same time countersink holes on both sides and the chamfer of the paintbrush handle.  The machine is equipped with automatic loader.

TSP

Endshaping machine to work ends with round, half round and conical profile. With this machine it is also possible to make holes, conical and cylindrical dowels or partial milling operations…

TSP

Endshaping machine to work ends with round, half round and conical profile. With this machine it is also possible to make holes, conical and cylindrical dowels or partial milling operations…

FA/F

The boring-treading machine The milling machine with numerical control makes the drilling and the thread operation at the same time. It is suitable for making blind holes and threads on the blocks…

2TSP

Automatic endshaping machine to work  both ends at the same time with round, half round and conical profile. With this machine it is also possible to make holes, conical and cylindrical…

TAUS 2½

In special execution to process round stocks, straight, slightly curved or shaped such as shovel, hoe rake handles, chair legs, oars, billiard cues etc. The machine can be equipped with: pneumatic loader…

2LU/C380

Machine suitable to sand shovel, spade, pick, broom and umbrella handles, as well as oar poles, chair and table legs, tent-rods, bamboo and rattan sticks and so on. The pieces to be processed can be straight,…

LBE/2000

Automatic line to produce broom handles complete with round end, thread, hole and label. The line consists of: double trimming unit complete with loader, one rod milling machine model "TAU/60 a sanding…

TTS/180

Automatic line for the production of straight and slightly curved  shovel handles with variable diameter.                         …

2LU/200

This machine allows to sand straight elements with cylindrical, oval or irregular section made of wood or plastic materials. This sanding machine is particularly suitable for the working of cylindrical…

TTL/180

Automatic line for the production of straight round sticks like shovel handles, broom handles, curtains rods, chair legs, handrails, table legs, umbrella and  walking sticks. …

2LU/100

Machine suitable to sand shovel, spade, pick, broom and umbrella handles, as well as oar poles, chair and table legs, tent-rods, bamboo and rattan sticks and so on. The pieces to be processed can be straight,…

LC/500

New automatic line for the production of wooden spoons. The line consists of three machines: a milling machine to mill the outside profile, a moulding machine to work the round handle and a milling/ sanding…

2LU/45

Machine suitable to sand shovel, spade, pick, broom and umbrella handles, as well as oar poles, chair and table legs, tent-rods, bamboo and rattan sticks and so on. The pieces to be processed can be straight,…

LIB

Automatic line to end face the 2 sides of round handles, make one or more perpendicular holes, and sanding the handle. The handles are manually put into the loader that loads one handle at a time in the…

LMB

Automatic line for the production of straight and slightly curved  shovel handles with variable diameter. This line is composed by the following machines: double end cutting machine, complete…

DCS/L

Machine with hydraulic feeding suitable to work the outside profile of flat paintbrush and knife handles, spoons, brushes, etc. The machine works with 2 cutters at the same time guided by a cam. After…

DCS/F

Machine with hydraulic feeding suitable to work the outside profile of flat paintbrush and knife handles, spoons, brushes, etc. The machine works with 2 cutters at the same time guided by a cam. After…

FIP

Automatic machine suitable to work the upper part of brushes, the outside cup of the spoons, the shaped parts of brooms, the oval grip of flat paintbrush handles and the profile of knife handles, etc.

3FRA/M50

This machine has been manufactured to reach a high production capacity and a high precision in the finished pieces. It is suitable for the mass production of straight, conical and shaped pieces, such…

PRA/M140

Automatic milling copying machine with loader and adjustable heads. It is particularly suitable for the mass-production of straight shaped pieces with oval, round, square, octagonal section, etc., such…

PRA/M60

Automatic milling copying machine with loader and adjustable heads. It is particularly suitable for the mass-production of straight shaped pieces with oval, round, square, octagonal section, etc., such…

PRA/M15

Excellent machine for the production of small wooden items such as dowels, trowel and paintbrush handles with oval, round, square, octagonal section, etc. The profile can be oval, cylindrical etc. Fully…

FBI/2C2T/2X1Tcnc

This CNC  machine is suitable for milling the knife handle profile to make a tenon and drill it. Description: The rough piece are manually placed in the loader that loads 1 piece at time on the working…

FBI/2C2T/3X1cnc

Milling machine with numerical control suitable to process the internal and external profiles of wooden brushes. With this machine it is possible to mill knife handles, hacksaw handles…

FBI/2C2T/4X2cnc

This CNC milling machine is suitable to work knife handles, hacksaw handles, brush and paintbrush handles, etc. It is provided with two working positions, that allow to work two elements at the same time.…

FBI/2C4T/4X15cnc

CNC milling machine for the production knife handles, hacksaw handles, brush, paintbrush handles etc. The machine is equipped with 4 heads in order to work both the external and internal profile and it…

FBI/1C1T/2X1cnc

The machine is suitable for milling the knife handle profile and to drill it. Description: The rough pieces are placed into the loaders, each one feeds 1 piece on the working table. At this point the…

FMC/cnc

This CNC milling machine is suitable for mass production of objects milled on three sides like knife handles, flat paintbrush handles and different shapes. The machine has two working positions,…

3FRA/cnc

Automatic CNC milling machine to work knife handles, paintbrushes, hairbrushes with round, oval, square, octagonal, hexagonal section, etc. The machine is composed of a loader, one or two optional drilling…

REVO 2.0

This automatic line has been designed for milling shaped knife handles up to 5 different profiles with round, oval and irregular sections. The line is composed of 3 machines all connected together, one…

CA/2T

This milling machine has been manufactured to work 2 pieces at the same time. The machine is particularly suitable to mill the external profile of small objects such as rosettes, dishes, brushes,…

CA/450

This milling machine has been manufactured to work special articles. The machine is particularly suitable to mill the outside profile of rosettes, trays, dishes, chair and table parts, brushes, brooms…

LMC/200

Machine suitable for the simultaneous sanding of two knife handles. The handles are loaded and clamped, and they begin to turn at the desired speed, while two abrasive bands with different grains, one…

FDT/200

Fully automatic machine with four working positions for the mass production of shaped bottle caps, small discs, round dowels, etc., starting from raw bars. This machine is composed by a…

FLB/cnc

The machine is suitable for cutting square, rectangular, round and triangular blocks starting from a bar having the same section. The work process is controlled by a CNC where shape and dimensions of…

FD/50

Machine suitable for executing dice starting from square bars. The process is controlled by CN where you set the bar width and die size. The already planed bars are placed manually into the…

FAM

This automatic milling machine to execute 2 grooves and 2 holes on yardsticks. The yardsticks already milled to the right dimension, are put in the loader. The machine uses 4 top and 4 bottom electrospindle…

TP/C

Automatic cutting machine to divide the wooden blocks in 3 pieces. The pieces are manually put into the loader, by which they are fed into the working position and then clamped. Two circular blades do…

TTC/cnc

Automatic cutting machine with numerical control is suitable for cardboard tubes. To start the machine up it is necessary to program with the CN the diameter of the tube, the width of the paper and…

AF/M

Motorized sharpening machine to sharpen at the same time 3 knives of the machine "TAU" and "TAUS".

AUC/PRA

The machine allows you to sharpen and profile straight and shaped knives for the machine "PRA/M".

AUC/TAUS

Motorized sharpening machine to sharpen at the same time three knives of the machine "TAUS".

2FSC/CNC

Automatic CNC milling machine with 2 loaders to mill preshaped handles starting from small boards. Boards are automatically loaded and clamped on both sides. Then two cutters that are mounted on 2 slides…

DCS/Lcnc

This CNC milling machine is suitable to work paintbrush handles. The pieces are positioned into the loader, which loads 10 of them on the holder slide, where they are clamped. Two slides for the…

FTF/C

Automatic transfer to obtain from square blocks cut, bored and milled pieces with the desired diameter and length. The squared ledges cut at 1 meter length are put into the transfer loader. A pneumatic…